Rks. 062.20.0414 Four Point Contact Slewing Bearings with Internal Gear

J max.:133 mm; Recommended diameter for attachment bolts, inch G:0.5 in; A:45 mm; d:36.512 mm; Mass bearing unit:0.69 kg; Housing material:Composite for food a; B4:6 mm; A1:27 mm; Fatigue load limit Pu:0.655 kN; Limiting speed:3200 r/min;

D1 ≈:803 mm; r1,2 min.:3.3 mm; Calculation factor Y1:2; Calculation factor Y2:3; Calculation factor Y0:2; Comparative axial load rating CFa:580 kN; B:523.08 mm; Basic dynamic load rating C:13400 kN; T:539.747 mm; Fatigue load limit Pu:2000 kN;

B:15mm; Weight:0.02 KGS; Availability:In Stock; D:68mm; Seals or Shields:Non-Contact Seal; d:40mm; Cage Type:Steel; Dynamic Load Rating (kN):16.8; SKU:6008vv-nsk; Fatigue Load Rating (kN):--;

Clearance:Standard; B:12mm; Weight:0.14 KGS; D:72mm; d:50mm; Speed Rating (r/min):16500; Seals or Shields:Open Type; Availability:In Stock; SKU:3mm9310wicrsuh-timke; Dynamic Load Rating (kN):13.8;

Basic Dynamic Radial Load Rating C:36400 N; d:35.000 mm; Accessories:Synthetic Rubber Sea; B:34.93 mm; Basic Static Radial Load Rating Co:20000 N; D:80.0000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; Sealed Speed Rating n

A5:23.5 mm; Basic static load rating C0:19 kN; A1:17 mm; Hexagonal key size for grub screw N:3 mm; Housing material:Composite; Limiting speed:4800 r/min; A3:3.2 mm; Basic dynamic load rating C:30.7 kN; Mass bearing unit:0.89 kg; Thread grub screw G2:M6;

rc max.:1 mm; b:15 mm; Calculation factor Y1:0.81; Calculation factor Y2:1.2; Ca min.:5 mm; D:190 mm; K:10 mm; r3,4 min.:3 mm; Basic dynamic load rating C:486 kN; Limiting speed:3400 r/min;

T:46.4 mm; A3:3.2 mm; End cover:ECY 207; Recommended diameter for attachment bolts, mm G:12 mm; Fatigue load limit Pu:0.655 kN; Mass bearing unit:1.35 kg; d:31.75 mm; Basic dynamic load rating C:25.5 kN; Basic static load rating C0:15.3 kN; J:92 mm;

Accessories:Two Shields; Basic Static Radial Load Rating Co:375000 N; Basic Dynamic Radial Load Rating C:291000 N; Sealed Speed Rating n3:940 rpm; Grease Speed Rating Open/Shielded n1:1500 rpm; Fillet Radius ra:3.00 mm; D:400.0000 mm; B:65.00 mm; d:260.000 mm; Oil Speed Rating Open/Shielded n2:1800

Weight:0.02 KGS; Static Load Rating (kN):930; Availability:In Stock; Fatigue Load Rating (kN):88; Cage Type:Steel; SKU:22226ek-skf; Dynamic Load Rating (kN):735; Reference Speed Rating (r/min):2600; B:64mm; D:230mm;

Stabilizing ring:SR-16-13; A1:88.9 mm; H:169.863 mm; S:4.763 mm; Mass pillow block:17.4 kg; P150°:19.6 kN; J1:53.975 mm; Ca:42.799 mm; P90°:36 kN; P120°:21.8 kN;

Seals or Shields:Open Type; D:5.625 Inch; Clearance:Standard; SKU:xlj4e-rhp; d:4 Inch; Availability:In Stock; Weight:0.20 KGS; B:0.875 Inch;

r3,4 min.:1 mm; B2:10 mm; B1:5 mm; Mass angle ring:0.082 kg; d1 ≈:84 mm; d:70 mm;

Cap bolt recommended tightening torque:1220 N·m; Da:309.999 mm; End plug (suffix Y):EPR 18; Stabilizing ring:SR-34-0; P90°:207 kN; Cap bolt, SAE grade:8; Ca:95.809 mm; Initial grease fill:878.85 g; Mass pillow block:168 kg; Pa:43.6 kN;