Kato And Tadano Crane Bearing

Contact Now

Kato And Tadano Crane Bearing supplies anti-friction roller bearings needed to repair gearboxes, motors, wheel assemblies and bottom blocks for any brand of overhead crane. All of the bearings sold by Kato And Tadano Crane Bearings are crane-duty bearings, available in sizes from a half-inch and larger, up to 21 inches in diameter for any OEM application required. Most roller bearings are made of carburized steel, and come in both shielded and sealed variants.  


CraKato And Tadano Crane Bearings are cylindrical roller thrust bearings similar to the TP series bearings, but with added features that make them suitable for crane hook use. Like the TP series, these bearings have hardened and have top and bottom precision ground plates with milled brass cages, precision ground rollers and a mild steel band to retain the rollers. The inside diameter of top and bottom plates are the same to allow slip fit centering on the crane hook shank. They include a coated steel weather shield for protection against the elements, which is tightly fitted to the top plate O.D. and overlaps the bottom plate O.D. This acts as limited sealing device. These bearings are available with optional grease fitting in the weather shield which allows for additional grease to the bearing. Shank diameters up to 10” are cataloged. These bearings are used widely in primary metals, material handling, and shipping ports.
 

Rb 4010 Crossed Roller Bearing Rb Type

2201etn-qbl 32mm
Plastic In Stock

Double-Row Four Point Contact Slewing Ball Bearing with External Gear 9e-2b20-0343-1081

In Stock 0.42
4800 C3

033.30.1500.03 Wind Power Bearing for 900kw Wtg Pitch Bearing

7.5 mm 88.3 mm
1.5 mm 1.5 mm

Four-Point Contact Slewing Bearing, External Gear Vsa200844n

1546 mm 2765 kg
1580 mm 20 r/min

High Quality Psl Single-Row Crossed Roller Slewing Ring 9o-1z20-0220-0184

xlj1.5/8-rhp 1.625 Inch
Open Type In Stock

Hot Sell F064588 John Deere Bogie and Center Bearing

4.5 mm FYTWK 504 Y
15 mm 0.375 in

Slewing Bearing Non Gear 90-20 0311/0-07002

2780 146mm
4170 870

Single-Row Angular Contact Slewing Ball Bearing (External Gear)

149.225 mm AN 26
82.55 mm 400 N·m

Slewing Bearing Ring Standard Series Kd210 230.20.0500.013

5 mm 312 mm
4750 kN 312 mm

Slewing Bearing Ring Standard Series Kd210 230.20.0700.013

0.05 0.25 m/s
5 m/s 0.021 kg

Crossed Cylindrical Roller Bearing

Steel Two Rubber Seals
37mm In Stock

Forestry Machine Logset Forwarder Center Slewing Bearing 013.25.310

8.125 Inch Open Type
1.75 Inch mjt3.3/4-rhp
1/17